Assembly instructions – Yetter 2984 Series Generation II Maverick Opener User Manual
Page 22
Advertising
22
ASSEMBLY INSTRUCTIONS
2984-005 – NOTCHED DISC SEALER KIT
2984-006 – 16” DISC SEALER KIT
STEP 6. Attach the blade/hub assembly to the 2920-329 L-bracket using the D-bolt through 1) ¾” spacer,
5/8” lock washer and 5/8” hex nut. Torque 150 ft.lbs.
STEP 7. Adjust the angle of the disc blades so that the blades are approximately 8” apart and 4” from the
center of the knife.
STEP 8. Tighten all of the hardware to the recommended torque unless otherwise stated.
Advertising