GReddy TURBO KITS: Toyota Celica GTS 2000-02 / MP62 - Manual (Page 6)

３．Kit Install
３－１ OE ventilation Tube No. 1 Modification
Remove the bracket from the ventilation tube in
2-13. Install back to same location.
※ After removing bracket, make sure to de-burr and
paint surface of modified area.
Please use safety glasses and a
mask to prevent injury.
Remove
Kit Alternator Bracket
３－２ Kit Lower Alternator Bracket Install
(1) Remove the two lower bolts of the A/C compressor
brackets. Place the provided spacers between the
kit alternator bracket and OE compressor bracket.
※ Replace the two bolts with the provided bolts. Do not
torque these bolts at this time.
〈Parts №１１，１３，３０〉
Floating Nut
(2) Place the floating nut in the lower alternator bracket.
〈Parts №７，８〉
(3) Install the lower alternator bracket to the engine
block using the provided bolt and attach the
alternator bracket (1) to the lower alternator bracket.
※ Torque bolts in this order:
A/C compressor bracket, lower alternator bracket
(engine block side), alternator bracket.
Kit alternator
bracket
〈Parts №２５，３１〉
―６―