Outback Power Systems MATE2 System Controller and Display Installation and User Manual - Manual (Page 13)

13
NOTE: For a viewing of all MATE screens, please see pages 110-124 at the end of this manual.
Power Up
A soon as the MATE cable is plugged into a powered OutBack product, the MATE itself will
power-up and display several information screens.
G’day Mate
(C) 2008
OutBack
Power
Systems
Version
Code a.a.a
Serial #xxxxxxxx
Screen EE b.bb
First Screen
Second Screen
Third Screen
• “Code” dictates the MATE’s operation and
features*
• Serial #” matches the bar code sticker inside the
MATE on its circuit board
• “Screen EE” refers to the MATE’s menu system
NOTE: you will need the code and serial number of the MATE if contacting OutBack Power
Systems regarding its operation