Outback Power Systems MATE2 System Controller and Display Installation and User Manual - Manual (Page 61)

61
ADV/MATE/PG1-----------------------
choose category:
HBX GRIDUSE AGS PG2
In the ADV menu, push the <MATE> soft key to
view the Advanced MATE functions.
Pressing the <HBX>, <GRIDUSE>, or <AGS>
soft keys open their specific advanced functions.
Pressing the <PG2> soft key opens the next
MATE advanced screen.
Pressing the <DEFAULTS> soft key brings up the
ADV/MATE/DEFAULT screen which allows the
user to re-establish all the MATE’s factory default
values (see pages 96-98). Press the <PG3 MATE Summary Screens.> soft key
to view the next MATE advanced screen.
Pressing the <CC> soft key enables charge con-
troller float state coordination. This means when
a charge controller finishes a bulk charge and
moves into float charge, the MATE directs any
other charge controllers into a float charge as well.
Pressing the <NO> soft key disables float state
coordination.
Press the <PG3 MATE Summary Screens.> soft key to return to the previous
screen.
ADV-----------------------------
choose device:
FX CC DC MATE
ADV/MATE/DEFAULT-----------
reset MATE to
factory default
RESET NO
ADV/MATE/PG3------------------------
advanced charger
float control
PG2 CC FN-DC PG4
ADV/MATE/PG2-----------------
choose category:
PG1 DEFAULTS PG3
ADV/MATE/PG3/CC------------
enable CC float
coordination: Yes
PG3 YES NO ADV