Outback Power Systems MATE2 System Controller and Display Installation and User Manual - Manual (Page 30)

30
SETUP/MATE/SUMMARY---------
summary control
BACK TYPE DELAY ROLL
SETUP/MATE/SUMMARY/TYPE---
summary Roll
screen type
BACK
INC DEC
SETUP/MATE/SUM/TYPE---------
summary None
screen type
BACK INC DEC
SETUP/MATE/SUM/TYPE---------
summary FX Only
screen type
BACK
INC DEC
Press either <INC> or <DEC> up to six
times to change Summary screen
To choose the SUMMARY screen you want to
view automatically and also view via the MAIN
menu, press the <TYPE> soft key on the SETUP/
MATE/SUMMARY screen.
Press either the <INC> and <DEC> soft keys to
change the summary screen
Roll—switches among the FX, CC (Charge
Controller), DC Only, and DC Simple summary
screens automatically if an FX, Charge Control-
ler, and FLEXnet DC are connected to the MATE
through an OutBack Power Systems HUB.
None—disables the SUMMARY screen from
automatically opening; the SUMMARY screen can
still be accessed via the <SUM> soft key on the
MAIN screen.
FX Only—displays the FX SUMMARY screen.