Outback Power Systems MATE3 Owners Manual - Manual (Page 124)

Programming
122 900-0117-01-00 Rev C
Data Logging
The Data Logging feature enables the MATE3 to record operational status information about the system.
It will record data to the MATE3's internal flash memory for up to one year and selectively to an SD card up
to the capacity of the card.
Figure 153 MATE3 Data Logging Screen
Figure 154 Inserting the SD Card
Side View
Front View
Front Back
SD Card Icon
Allow 2” clearance
for insertion of
SD card
SD Card
Set Points:
 Internal Data Log Write Interval – 60 to 3600 seconds
 SD Card Data Logging Mode – Excel , Disabled, Compact
 SD Card DataLog Write Interval – 1 to 60 seconds
NOTE:
Excel records the full date and time for each
interval recorded.
Disabled turns off data logging to the SD card.
It does not turn off data logging to the internal
flash memory.
Compact records only the minutes and
seconds for each interval recorded.