Outback Power Systems MATE3 Owners Manual - Manual (Page 59)

Operation
900-0117-01-00 Rev C 57
From the
CHARGER hot key’s Charger Status screen, the <Bulk Charge> soft key brings up a screen
that can start or stop the bulk stage of a new charging cycle.
Figure 56 Using the CHARGER Hot Key (Bulk Charge)
Soft Key Options:
<Start Bulk> starts a new charging cycle. The screen will display Bulk Charge
Started when the <Start Bulk> soft key is pressed.
<Stop Bulk> stops a charging cycle once started. The screen will display Bulk
Charge Stopped when the <Stop Bulk> soft key is pressed.
<BACK> returns to the Charger Status Screen.