Outback Power Systems MATE3 Owners Manual - Manual (Page 78)

Programming
76 900-0117-01-00 Rev C
Restoring a Configuration from an SD Card
Figure 76 Restore System Configuration
Firmware Version
The Firmware Versions screen shows the current firmware versions for all the devices attached to the
system. This is a read-only screen. No changes can be made from this screen.
Figure 77 Firmware Version
Press <Continue> to
return to the
Main Menu.
To restore a configuration from an SD card:
1. From the Main Menu, select Settings.
2. From the Settings Menu, select System.
3. From the System Configuration menu, select
Save/Restore Information.
4. Select the Restore System Configuration menu item.
5. If other profiles have been saved on the SD card, a list
will be displayed. Choose one of the following options.
Use the control wheel to scroll to the name of the file
that is to be restored.
6. Press <Restore> to start the process.
7. Wait for the confirmation screen to appear.
8. Press <Continue> to return to the Main Menu.
NOTE:
Firmware versions shown in this
illustration are examples only.
Actual versions may vary.