Outback Power Systems MATE3 Owners Manual - Manual (Page 146)

Programming
144 900-0117-01-00 Rev C
To Delete an Event Log
Figure 175 Deleting Event Logs
To Delete an Event Log:
1. Access the Event Logs menu as shown in Figure 173.
2. On the Date Range set point, use the control wheel to select the
date for the event log (or logs) to be deleted. The range will start
with "
All" and will move backward to yesterday, up to one
year's worth of logs.
3. If a log with a specific date is desired, then use the control wheel
to scroll through the list. When the name to be deleted is
selected, press <Continue>.
4. Press <Yes> to delete event log on the SD card.
5. Select one of the two options.
 Press <Yes> to delete the event log. Or
 Press <No> to return to the Date Range screen and select a
different event log.
6. Pressing <Yes> in step 5 above will delete the selected event
log. Wait while the MATE3 completes this action.
7. Once the Events Deleted confirmation screen appears, press
<Continue> to return to the Event Logs menu.
Returns to the Event Logs screen.