Outback Power Systems MATE3 Owners Manual - Manual (Page 60)

Operation
58 900-0117-01-00 Rev C
From the CHARGER hot key’s Charger Status screen, the <EQ Charge> soft key brings up a series of
screens that can turn on the battery equalization process.
Figure 57 Using the CHARGER Hot Key (EQ Charge)
Soft Key Options:
<Back> returns to the Charger
Status screen.
<Start EQ> starts the equalize
charging stage.
<Stop EQ> stops the equalize
charging stage.
Screen Items:
Battery displays the uncompensated battery voltage.
Equalize (below Battery) displays the target voltage
for the Equalization stage. The timer to the right of this
item begins running once this voltage is reached.
Equalize (right side of screen) displays whether this
mode is enabled or disabled.
Last EQ charge displays the date and time for the
most recent equalization cycle.
Soft Key Options:
<Back> returns to the Equalize Charge screen.
<Next> advances to the confirmation screen.
Soft Key Options:
<Exit> returns to the Charger Status screen.
<Yes> begins the equalization process and
simultaneously returns to the
Equalize Charge
screen. The process can be stopped by pressing the
<Stop EQ> soft key on the
Equalize Charge screen.