Vaisala DM70 - Manual (Page 59)

Chapter 7 ____________________________________________________Sampling from Processes
1. Detach the MI70 recharger adapter from the socket of the
sampling system and plug in the recharger provided with DM70.
2. Disconnect the recharger when the battery is full and put the
MI70 recharger back into the case.
If you want to recharge the sampling system and MI70 at the same
time, connect the MI70 recharger adapter to the recharger socket on
top of MI70 and recharge DSS70A as described above.
Changing the Battery
Replacement batteries can be ordered from Vaisala (see section
Accessories on page 89).
1. The battery is fitted underneath the sampling system. To change
the battery, lift the sampling system from the briefcase. To lift
the system, use two screwdrivers as lever arms and lift the
system from two corners. See Figure 26 on page 57.
0403-049
Figure 26 Lifting the System
VAISALA _______________________________________________________________________ 57