Vaisala GMP231 - Manual (Page 51)

Chapter 4 ____________________________________________________ Vaisala Industrial Protocol
VAISALA ________________________________________________________________________ 49
Reset Probe
Use the RESET command to reset the probe.
RESET<cr>
When the RESET command is given, the probe will restart as if it had
just been powered on.
Restore Factory Settings
Use the FRESTORE command to restore the probe to its factory
configuration. All user settings will be lost.
FRESTORE<cr>
NOTE After using the FRESTORE command, reset the probe using the
RESET command.
Example:
pass 1300
frestore
Parameters restored to factory defaults
reset
GMP231 - Version 1.1.0
Vaisala Oyj 2012 - 2014