1 system error messages -15 – Acer 6000 User Manual

Page 32

Advertising
background image

Chapter 1 - Getting Started 1-15

Table 1-1

System Error Messages

Error Message

Corrective Action

Bad CMOS Battery

Replace battery. Contact your dealer.

CMOS Checksum
Error

Run Setup. See Chapter 3.

Floppy Drive
Controller Error

Check and connect the cable to the floppy
drive or controller.

Floppy Drive Error

Floppy may be bad. If not, check the
floppy drive and replace if necessary.

DRAM Configuration
Error

Check and modify DRAM configuration to
agree with Table 4-1.

Equipment
Configuration Error

Run Setup. See Chapter 3.

Hard Disk Controller
Error

Check and connect the cable to the hard
disk drive or controller.

Hard Disk 0 (1, 2, 3)
Auto Detection
Failed

Replace the hard disk drive controller.
Check the HDD cable connections and
CMOS setup configuration.

I/O Parity Error

Contact your dealer.

PS/2 Keyboard Error
or No Keyboard
Connected

Check and connect the keyboard to the
system unit.

PS/2 Keyboard
Interface Error

Contact your dealer.

Memory Error

Check DIMMs on the system board.
Contact your dealer.

Memory Size
Mismatch

Run Setup. See Chapter 3.

Advertising