Acer 6000 - Manual (Page 62)

Chapter 3 - BIOS Utility 3-15
IRQ
This function lets you assign an interrupt for the serial port. The options are IRQ
3
and 10 .
The Base Address and IRQ parameters are
configurable only if the Serial Port parameter is
enabled.
3.5.2 Parallel Port
This parameter allows you to enable or disable the parallel port.
Base Address
This function lets you set a logical base address for the parallel port. The options
are:
•
3BCh
•
378h
•
278h
IRQ
This function lets you assign an interrupt for the parallel port. The options are IRQ
5 and 7 .