Acer 6000 - Manual (Page 50)

Chapter 3 - BIOS Utility 3-3
• Press to move to the next page or to return to the previous page.
• To change a parameter setting, press or until the desired setting is
found.
• Press to return to the main menu. If you are already in the main menu,
press again to exit Setup.
The parameters on the screens show default values. These values may not be the
same as those in your system.
The grayed items on the screens have fixed settings and are not user-configurable.
3.2 System Information
The following screen appears if you select System Information from the main
menu.
System Information Page 1/1
Processor ........................... Pentium II
Processor Speed ..................... 333 MHz
Internal Cache (CPU Cache) .......... 32 KB, Enabled
External Cache ...................... 512 KB, Enabled
Floppy Drive A ...................... 1.44 MB, 3.5-inch
IDE Primary Channel Master .......... Hard Disk, 3909 MB
IDE Primary Channel Slave ........... None
IDE Secondary Channel Master ........ IDE CD-ROM
IDE Secondary Channel Slave ......... None
Total Memory ........................ 48 MB
1st Bank .......................... SDRAM, 16 MB
2nd Bank .......................... SDRAM, 32 MB
PgDn/PgUp = Move Screen, Esc = Back to Main Menu