Acer 6000 - Manual (Page 55)

AcerPower 6000 User’s Guide 3-8
3.4 Disk Drives
Select Disk Drives from the main menu to configure the drives installed in your
system.
The following screen shows the Disk Drives menu:
Disk Drives Page 1/1
Floppy Drive A ........... [xx-MB xx-inch]
Floppy Drive B ........... [xx-MB xx-inch]
LS-120 drive as ........... [ Normal ]
•
IDE Primary Channel Master
•
IDE Primary Channel Slave
•
IDE Secondary Channel Master
•
IDE Secondary Channel Slave
↑↓
= Move Highlight Bar F1 = Help
Esc = Exit
→ ←
= Change Setting,
3.4.1 Floppy Drives
To enter the configuration value for the first floppy drive (drive A), highlight the
Floppy Drive A parameter. Press
or to view the options and select the
appropriate value.
Possible settings for the Floppy Drive parameters are:
•
[ None ]
•
[360 KB, 5.25-inch]
•
[1.2 MB, 5.25-inch]