Acer 6000 - Manual (Page 33)

AcerPower 6000 User’s Guide 1-16
Table 1-1 System Error Messages (continued)
Error Message Corrective Action
Onboard Serial 1 Conflict Run Setup and disable Onboard Serial
1. See Chapter 3.
Onboard Serial 2 Conflict Run Setup and disable Onboard Serial
2. See Chapter 3.
Onboard Parallel Port
Conflict Run Setup and disable Onboard
Parallel Port. See Chapter 3.
PS/2 Pointing Device
Error Check or connect the pointing device.
Contact your dealer.
PS/2 Pointing Device
Interface Error Contact your dealer.
Press F1 key to continue
or Ctrl-Alt-Esc for Setup
Press or .
Press Esc to turn off NMI,
any key to reboot Press to disregard NMI error.
Press any key to reboot the system.
Protected Mode Test Fail Contact your dealer.
RAM BIOS Error Contact your dealer.
Real Time Clock Error Run Setup. See Chapter 3.
Shadow RAM Fail Contact your dealer.
System Memory Address
Error Check DIMMs on system board or
contact your dealer.