Acer 6000 - Manual (Page 59)

AcerPower 6000 User’s Guide 3-12
Heads
This parameter specifies your hard disk’s number of heads, and is automatically
set depending on your Type parameter setting.
Sectors
This parameter specifies your hard disk’s number of sectors, and is automatically
set depending on your Type parameter setting.
Size
This parameter specifies the size of your hard disk, in MB.
Hard Disk Size > 504 MB
When set to
Auto
, the BIOS utility automatically detects if the installed hard disk
supports the function. If supported, it allows you to use a hard disk with a
capacity of more than 504 MB. This is made possible through the Logical Block
Address (LBA) mode translation. However, this enhanced IDE feature works only
under a DOS or Windows 3.x/95/98 environment. Other operating systems
require this parameter to be set to
Disabled .
Hard Disk Block Mode
This function enhances disk performance depending on the hard disk in use. If
you set this parameter to
Auto , the BIOS utility automatically detects if the
installed hard disk drive supports the Block Mode function. If supported, it allows
data transfer in block (multiple sectors) at a rate of 256 bytes per cycle. To
disregard the feature, change the setting to
Disabled.