Acer 6000 - Manual (Page 64)

Chapter 3 - BIOS Utility 3-17
3.5.3 Onboard Device Settings
The Onboard Device Settings menu allows you to configure the device controllers
available onboard. Selecting this option from the Onboard Peripherals menu
displays the following screen:
Onboard Device Settings Page 1/1
Floppy Disk Controller .............. [Enabled ]
IDE Controller ...................... [Both ]
PS/2 Mouse Controller ............... [Enabled ]
USB Host Controller ................. [Enabled ]
USB Legacy Mode ................... [Disabled]
Onboard Audio Chip .................. [Enabled ]
↑↓
= Move Highlight Bar F1 = Help
Esc = Exit
→ ←
= Change Setting,
Floppy Disk Controller
This parameter lets you enable or disable the onboard floppy disk controller.
IDE Controller
Set this parameter to Primary to enable only the primary IDE channel; Secondary
to enable only the secondary IDE channel;
Both
to enable both primary and
secondary IDE channels; or Disabled to disable the onboard IDE controllers.
PS/2 Mouse Controller
This parameter enables or disables the onboard PS/2 mouse controller.