VariZoom VZCINEMAPRO-JR-K2 - Manual (Page 4)

- 4 -
The upper right portion of the LCD screen shows motor status and current positions for
pan, tilt, zoom and focus. A check in the box to the left of the axis name indicates that
that motor is enabled to run. If soft limits are enabled for the axis, the box is filled and
appears white with a blue check mark. The numbers to the right of the axis names are the
motor positions; pan and tilt are shown in degrees, and zoom and focus are shown as an
unscaled number from 0 to 1000.
1. Navigating the menu screens
Use the knob above the joystick to navigate through the menu screen. This knob (called
the setup knob) will also be used to change the value of selected parameters.
Use the “enter” button to select an item.
The “Menu” button is used to enter setup menu.
When pressed while already in the setup menu, the “Menu” button will enter a second
setup menu.