Videoswitch VDM - Manual (Page 18)

Videoswitch
VDM Digital Recorder
Vdm601t.doc
10
2 Installation
2.1 Connecting Up (4 Camera example)
102
101
100
103
104
105
107
106
75 Ohms
IN
Make these Connections…
100
Connect the video input of the Monitor to the main monitor output of the VDM using a BNC cable
101
Make sure that the monitor termination is switched on (i.e. to 75 Ohms)
102
Connect the first camera to Camera Input 1 on the VDM using a BNC cable
103
Connect the next camera to Camera Input 2 on the VDM using a BNC cable
104
Connect the next camera to Camera Input 3 on the VDM using a BNC cable
105
Connect the next camera to Camera Input 4 on the VDM using a BNC cable
106
Make sure that the voltage select switch is set to suit the mains supply voltage prior to applying power
otherwise damage may occur. The setting required in UK and Europe is 230Vac.
107
Connect the mains power using the IEC cable supplied using an IEC to 13A plug cable (provided)