Videoswitch VDM - Manual (Page 28)

Videoswitch
VDM Digital Recorder
Vdm601t.doc
20
6.2.5 9-way and 16-way Multi-Screen
If you have a VDM-9 or VDM-16, press multi-screen key to view nine pictures at once on the
screen. If you have a VDM-16, press multi-screen key again to view sixteen pictures at once on the
screen.
6.2.6 Zoom
To magnify a full-screen live image, you must enter
LIVE mode (section 6.1) then:
ALT
and
Press the
ALT key and the ZOOM key to enter zoom mode.
Н
Н
Н
Н
Use the cursor keys to move around the image to see the magnified part that you
require
To exit zoom mode, press the
ALT and key again.
6.3 Auto-Sequencing
6.3.1 Auto-Sequencing Main Monitor
ALT and
Select auto-sequencing on the main monitor to by pressing the
ALT and the
keys. Auto sequencing is cancelled by pressing these two keys again, or by
pressing any camera select key.
The auto-sequence symbol is displayed at the top of the screen on the main monitor when sequencing is
enabled.
If a PIP image is being displayed, the main image will normally be sequenced. You may alternatively specify
sequencing of the PIP via the
SETUP menus (SETUP/Display/PIP mode).
If quads are being displayed and there are more than four cameras installed, selecting auto-sequence will
cause the quads to sequence.
You may specify that only some of the cameras are to be included in the sequence. Refer to the
SETUP
menu (SETUP/ User Menu /Auto Sequence (Main)/Camera List).
You may also specify the dwell time on each camera (SETUP/Display/Auto Sequence (Main)/Dwell Times).
6.3.2 Auto-Sequencing Spot Monitor
ALT and
Select auto-sequencing on the spot monitor to by pressing the
ALT and the
keys.
Auto sequencing is cancelled by pressing these two keys again.
The auto-sequence symbol is displayed at the top of the screen on the main monitor when sequencing
is enabled.
You may specify that only some of the cameras are to be included in the sequence. Refer to the
SETUP
menu (SETUP/User Menu/Auto Sequence (Spot)/Camera List).
You may also specify the dwell time on each camera (SETUP/Display/Auto Sequence (Spot)/Dwell Times).