12 specifications, 1 image capture and storage, 2 connectors – Videoswitch VDM User Manual
Page 57: 3 remote access options, Videoswitch
Videoswitch
VDM Digital Recorder
Vdm601t.doc
49
12 Specifications
12.1 Image Capture and Storage
Displayed Image Format
720 x 576 Pixels, 16 Million colours
Compressed Image Format
720 x 288 Pixels, 16 Million colours
Sample rate
13.5Mhz
Image Compression System
Wavelet
12.2 Connectors
12.2.1 Power
Input
Main input is switch-selectable 230/115 Volts AC 50/60Hz, 100W maximum. Check switch setting before
applying power or damage may occur.
12.2.2
Camera Inputs and Loop-Though Outputs
PAL compatible, 1 Volt pk-pk, 75 Ohm termination (may be switched off in the
SETUP menu)
12.2.3
Coax Monitor Outputs
PAL compatible, 1 Volt pk-pk, 75 Ohm termination.
12.2.4
S-Video Monitor Output
PAL compatible, 1 Volt pk-pk, 75 Ohm termination.
12.2.5 S-Video
Input
PAL compatible, 1 Volt pk-pk, 75 Ohm termination (not used).
12.3 Remote Access Options
During remote access, images are further compressed to increase the update rate. The degree of extra
compression may be selected from the “Vi-connect” software that is used on the PC to access the VDM.
The Ethernet data rate is limited to prevent undue loading of a computer network.
12.3.1 PSTN
Protocol V34
Data Rate
28.8kbit/sec
Typical image update time (8K image)
3 seconds