Videoswitch VDM - Manual (Page 44)

Videoswitch
VDM Digital Recorder
Vdm601t.doc
36
• Show
Numbers
• Show
Text
10.2.9 Text Alignment
The vertical and horizontal alignment of the text may be adjusted using the cursor keys such that all the text
is visible on monitors that over-scan. Press the
DEFAULT
key for standard positioning, and the
NO
key to
exit.
10.2.10 Time/Date Alignment
The vertical and horizontal alignment of the time and date may be adjusted using the cursor keys to suit the
user. Press the
DEFAULT
key for standard positioning, and the
NO
key to exit.
10.2.11 Upgrade from CD
Firmware upgrades are be undertaken via this option. The ENGINEER password needs to be entered to
upgrade the firmware if the “Upgrades need engineer password” option is set in the Engineer menu (section
10.4.8.3.4)
To upgrade, insert the upgrade CD in the CD drive and wait a few seconds for it to get up to speed. When
the upgrade information is displayed, check that the upgrade version is what you want and, if so, press
YES
to start the upgrade process. Enter the engineer password if asked.
Once started, the process must not be interrupted otherwise the system could be left inoperable. The
upgrade process takes about a minute. During this time, recording stops. The system will re-start
automatically following successful upgrade.