Kenwood KDC-X898 - Manual (Page 21)

English | 21
DSP settings (KDC-X998, KDC-BT958HD)
“Tweeter” [2] “FC” Shelving filter
1, 1.6, 2.5, 4 , 5, 6.3, 8, 10, 12.5 kHz
“Volume” Tweete volume
-8 ,-7, -6, -5, -4, -3, -2, -1, 0 dB
( Colored text : Factory setting)
[1] Displayed only when “FC” is set to a value other than
”Through”.
[2] Function of KDC-X998.
5
Select a setting item using [Control] knob.
6
Select a setting value using [Control] knob.
Exiting from the Function setting mode
Press and hold [ 1/6].
5-6. Listening position setting
You can adjust sound localization according to the
listening position.
1
Press [SRC] and select a source other than
Standby (“STANDBY”) using [Control] knob.
Refer to
<Source selection> (page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select “Audio Control” > “Pro Setup” > “DTA
Settings” > “Preset Position” using [Control]
knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13) .
4
Select a listening position using [Control]
knob.
Display Compensation seat
“ALL” Not compensating.
“Front R” Front Right seat
“Front L” Front Left seat
“Front All” Front seat
Exiting from the Function setting mode
Press and hold [ 1/6].