Kenwood KDC-X898 - Manual (Page 84)

84 |
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
19. SiriusXM® Satellite Radio (optional tuner and service required)
19-2. Listening to the SiriusXM®
Satellite Radio
Selecting a tuner source
1
Press [SRC].
Enters the Source selection mode.
2
Select a SiriusXM (“SiriusXM”) source using
[Control] knob.
Selecting a channel
Press [ E] or [F].
The seek mode can be changed. Refer to
<Selecting a Seek mode> (refer to below).
Selecting a Seek mode
Press [ S].
Display Operation
“Channel” Normal manual seeking.
”Preset” Searches in order of the channels in the preset memory.
Station preset memory
1
Press [ E] or [F] to select the station.
2
Press [ 1/6] twice.
3
Turn [Control] knob to select a memory
number (“1” – “24”).
4
Press and hold [Control] knob.
Recalling the stations in the memory
1
Press [ 1/6] twice..
2
Select a preset number “1” – “24”) using
[Control] knob.
19-1. Before use
• SiriusXM Satellite Radio operation requires the
connection of the optional SiriusXM-Connect
Vehicle Tuner. To activate the SiriusXM Vehicle
Connect tuner, you will need the Radio ID.
Make a note of your Radio ID
For each SiriusXM Vehicle Connect tuner, a unique
Radio ID is assigned. To confirm your Radio ID, tune
to channel 0. The letters I, O, S and F are not used in
any Radio ID.
The Radio ID is also located on the label of the
SiriusXM Connect Vehicle Tuner.
How to activate your SiriusXM Service
Go to www.siriusxm.com/activatenow or call 1-866-
635-2349 to activate your SiriusXM Vehicle Connect
Tuner.
To activate SiriusXM Canada service go to www.
xmradio.ca and click on “ACTIVATE RADIO” in the top
right corner, or call 1-877-438-9677