Kenwood KDC-X898 - Manual (Page 78)

78 |
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
17. Bluetooth audio
17-1. Before use
• You need to register your Bluetooth audio player
before using it with this unit. For more details, see
<15-2. Registering a Bluetooth device> (page 68) .
• You need to select the Bluetooth audio player
you wish to connect. Refer to <15-3. Selecting the
Bluetooth device you wish to connect> (page 69) .
17-2. Basic operations
Selecting a Bluetooth audio source
1
Press [SRC].
Enters the Source selection mode.
2
Select a Bluetooth audio (“BT AUDIO”) source
using [Control] knob.
Refer to
<Source selection> (page 14) .
Pause and play a song
Press and hold [ 1/6].
Selecting a song
Press [ E] or [F] button.
Fast-forwarding or fast-backwarding a song
Press and hold [ E] or [F].
Selecting an audio file folder
Press [ R] or [S] button.
Preparation for using the Bluetooth audio player
• All or some of the operations above cannot be performed if
the Bluetooth audio player is not ready for remote control.
• Switching between Bluetooth audio sources does not start
or stop playback automatically. Perform the operation for
starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect a Bluetooth
device.