Kenwood KDC-X898 - Manual (Page 82)

82 |
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
Bluetooth settings
18-5. Switching between two
connected cell-phones
When two Bluetooth devices are connected, you
can assign the Bluetooth device to be used in
priority to the other Bluetooth device.
1
Press [ Ú].
“BT MODE” appears and enter the Bluetooth mode.
2
Select “Device Priority” using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13) .
3
Select a “Sub –###–” using [Control] knob.
“Main”: Device used normally.
“Sub”: Device used only for call reception.
4
Press [Control] knob.
Exiting from the Bluetooth mode
Press [ Ú].
18-4. Displaying the firmware version
You can view the version of the firmware of this
unit.
1
Press [ Ú].
“BT MODE” appears and enter the Bluetooth mode.
2
Select “Settings” > “Detailed Settings” > “BT
F/W Update” using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13) .
The firmware version appears.
Exiting from the Bluetooth mode
Press [ Ú].
How to update
• For how to update the firmware, access our web site.
www.kenwood.com/cs/ce/bt/