Kenwood KDC-X898 - Manual (Page 55)

English | 55
12. Listen to the HD Radio™ tuner (KDC-X998, KDC-BT958HD)
12-3. Station preset memory
You can store a station in the memory.
1
Press [ E] or [F] to select the channel.
2
Press [ 1/6].
Enter the Preset memory mode.
3
Turn [Control] knob to select a memory
number (FM: “1” – “18”, AM: “1” – “6”).
4
Press and hold [Control] knob.
Exiting from the Preset memory mode
Press and hold [ 1/6].
About the Mix Station preset mode
• If you press [ 1/6] twice in step 2, the Mix Station preset
mode is selected with “Mixed Preset List” displayed.
In this mode, different bands and tuner sources (FM, AM,
SiriusXM, HD Radio tuner etc.) can be saved in the same
preset layer, which allows you to recall the desired station
without switching between bands or tuner sources.
A maximum of six stations can be preset in the Mix Station
preset mode.
Once the Mix Station preset mode is set, you can enter the
same mode by just pressing [
1/6] once in step 2.
Pressing [ 1/6] twice allows you to return to the normal
Station preset mode.
12-4. Auto memory
You can automatically store 18 (FM)/ 6 (AM) stations
with good reception in the memory.
1
Press [SRC] and select an HD Radio (“HD
RADIO”) source using [Control] knob.
Refer to
<Source selection> (page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select “Settings” > “Auto Memory” using
[Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 13) .
4
Select “YES” using [Control] knob.
When 18 (FM)/ 6 (AM) stations that can be received
are stored in the memory, the process in the Auto
memory is completed.