Kenwood TS-590S - Manual (Page 10)

10
4.3 ARUA-10 Settings
Follow the steps below to set up the ARUA-10
① Connect the TS-590S and computer using a USB cable.
② To launch the software, select Start Button > Programs > Kenwood > ARUA-10.
③ After launching the ARUA-10, a “Task Tray” icon appears. Right click this icon
and select “Device Settings” from the menu. The window shown below appears.
In this window you can specify sound devices for the transceiver’s audio reception
output and modulated audio input. You can also specify which microphones and
speakers connected to the computer to use.
In the above example, the computer has recognized four types of input sound
devices.
・ Microphone (USB Audio Codec)
・ Microphone (SoundMAX Integrated Digital Audio)
・ Line In (SoundMAX Integrated Digital Audio)
・ Phone (SoundMAX Integrated Digital Audio)
There are two types of output sound devices.
・ Speakers (USB Audio Codec)
・ Speakers (SoundMAX Integrated Digital Audio)
* The items listed depend on the operating system and sound devices used.