Kenwood TS-590S - Manual (Page 8)

8
Reference:
To implement data communications, turn this function OFF.
4.1.4 Data VOX Settings
Set whether or not to use the VOX function for the audio output from the rear terminal.
Menu No. Function Set value
69 Data VOX ON or OFF
The default setting is OFF.
Caution:
¾ When this function is ON, all sounds created by the computer other than the
intended audio transmissions are also transmitted, so be careful.
¾ When using this function for the first time, we recommend connecting a dummy
load to the TS-590S to perform checks and adjustments.
4.1.5 Data VOX Delay Time Setting
Set the VOX Delay Time Setting when using the Data VOX function.
Menu No. Function Setting range
70 Data VOX delay time 0 to 100
The default setting is 50.
4.1.6 Data VOX Gain Setting
Set the VOX Gain Setting when using the Data VOX function.
Menu No. Function Setting range
71 Data VOX gain for the USB audio input 0 to 9
The default setting is 50.
4.1.7 Allocating DATA SEND Functions to PF Keys
Set the DATA SEND functions to the PF keys to test the transmission of audio input
from the rear terminal. In this example, the [PF A] key has been set.
Menu No. Function Set value
79 Front panel PF A key assignment 205
The default setting is 200 (VOICE1).