Kenwood TS-590S - Manual (Page 13)

13
6. Frequently Asked Questions
This section introduces questions that have been asked to date, and subjects verified by
Kenwood Corporation.
Question Answer
Where can I get the USB audio
drivers?
You do not need to download the drivers.
When the computer and TS-590S are
connected via USB for the first time, the
standard driver for your operating system
is automatically installed.
There appear to be many
limitations. Is it actually possible
to operate using the USB Audio
Function?
Although it may not run exactly the same,
if you get used to it, general
communication on a practical level is
possible.
The point is to become accustomed to the
delays particular to USB audio. You may
have some initial confusion with issues
like the standby timing.
Installation
Can I use a USB or Bluetooth
headset?
You can use a USB or Bluetooth headset.
However, due to unavoidable delays
using these devices it takes time for
spoken audio to be transmitted. Also, time
is required for received audio to reach the
headphones.
We do not recommend use of these
devices when such delays can cause
problems.
The USB audio input/output levels are not
appropriately set. Please adjust the
settings via Menu Nos. 64 and 65 on the
TS-590S.
This may also depend on the
specifications of the sound device used in
your computer. Try using another sound
card or USB sound device.
Operation There is static in the audio
transmissions.
Audio transmission and
reception levels are low.
The sound device driver may need to be
upgraded. Try checking for new versions
and upgrade the driver.