Kenwood TS-590S - Manual (Page 3)

3
1. About the TS-590S USB Audio Function
When the TS-590S is connected to the computer using a USB cable, the USB audio
function can be used to play incoming audio over the computer speakers and transmit
audio from the computer microphone.
This setup guide explains how to set up the TS-590S to use its USB audio function and
how to use the ARUA-10 software to control input/output routes of the USB audio signals
from a computer.
Important
¾ USB audio may be delayed due to unavoidable principles. Consequently, do not
perform operations (such as contests or pile-ups requiring quick responses) for
which delays are likely to be a problem.
¾ Refer to Chapter 5 “Limitations" for other limitations.
¾ To use the USB audio function, knowledge not only of transceivers but also of
computers is required. Kenwood does not offer support for purchasing computers
or for customer's computers.
¾ Kenwood Corporation shall bear no responsibility for related damage such as
damage caused by missed communications and dialog opportunities due to
incorrect customer settings, nonconformances, or misoperations as a result of
using this document or the ARUA-10 software.