Kenwood TK-3401DE - Manual (Page 10)

2
PREPARATION
INSTALLING/ REMOVING THE BATTERY PACK
◆ Do not short the battery terminals or dispose of the battery by fi re.
◆ Never attempt to remove the casing from the battery pack.
◆ Install the battery pack after cleaning the battery pack contacts
and the transceiver terminals.
1 Align the battery pack with the back
of the transceiver, then press the
battery pack and transceiver fi rmly
together until the release latch on
the base of the transceiver locks.
2 To remove the battery pack, lift the
safety catch on the base of the
transceiver, then press the release
latch underneath the safety catch.
3 While pressing the release latch,
pull the battery pack away from the
transceiver.