Channel operating frequencies – Kenwood TK-3401DE User Manual
Page 22
14
CHANNEL OPERATING FREQUENCIES
To change the operating frequency of a channel:
1 Follow the operating steps in Zone Selection to select the
zone.
2 Rotate
the
Selector to your desired channel.
•
The transceiver announces Channel number.
3 Press and release the PTT switch.
•
A beep will sound and the transceiver announces Table
number.
4 Press
the
Side 1 or Side 2 key to increment/ decrement the
Table number, to select the new channel frequency.
•
Table numbers and their corresponding operating frequencies
are provided in the table
{p.15}
.
•
A voice announcement will inform you of the currently selected
Table number.
5 Press
the
PTT switch to save the setting.
•
A beep will sound.
•
Repeat steps 2 to 5 to set up another channel.
6 Turn the transceiver power OFF and then ON again to
activate the new settings.
Note:
◆ The transceiver will automatically return to normal operation if no
action is performed for 5 seconds.