Kenwood TK-3401DE - Manual (Page 28)

20
KEY ASSIGNMENT MODE
This transceiver allows you to reprogram the Side 1 and
Side 2 keys with any of the functions listed in the table below.
Explanations on the use of each function are provided under
“PROGRAMMABLE FUNCTIONS” {p.22}.
Table
Number
Function Name Digital Analog
0 None (no function)
✓ ✓
1 Calling Alert
✓ ✓
2 Key Lock
✓ ✓
3 Monitor
✓ ✓
4 Monitor Momentary
✓ ✓
5 Scan/ Scan Temporary Delete*1
✓ ✓
6 Scrambler N/A
✓
7 Squelch Off N/A
✓
8
Squelch Off Momentary
(Side 2 key default)
N/A
✓
9 Zone (Side 1 key default)
✓ ✓
✓ : Available
N/A: Not Available
*1 : Press and hold the Side 1 or Side 2 key for 2 seconds will
activate the Scan Temporary Delete function.
To change the functions of the Side 1 and Side 2 keys:
1 With the transceiver power OFF, press and hold the Side 1
and Side 2 keys while turning the transceiver power ON.
• Continue to hold the Side 1 and Side 2 keys until the LED
lights orange and the transceiver announces “Setup”.