Kenwood TK-3401DE - Manual (Page 21)

13
ZONE SELECTION
To change the operating zone:
1 With the transceiver power OFF, press and hold the PTT
switch and Side 1 key while turning the transceiver power
ON.
• Continue to hold the PTT switch and Side 1 key until the LED
lights orange and the transceiver announces “Self”.
2 Release the PTT switch and Side 1 key.
• The transceiver announces Zone number (1 or 2).
3 Press the Side 1 or Side 2 key to select the zone number.
• A voice announcement will inform you of the currently selected
zone number.
4 Press the PTT switch to set the zone number.
• A beep will sound.
• A voice announcement will inform you of the currently selected
zone type (Digital/ Analog).
5 Press the Side 1 or Side 2 key to select the zone type.
• A voice announcement will inform you of the currently selected
zone type.
• Proceed to the next step if you are not changing the zone type.
6 Press the PTT switch to save the setting.
• A beep will sound if there is no change in the zone type. The
transceiver will move to the Frequency Setting and announces
“Channel”.
• If the zone type is changed, the transceiver announces
“Confi rm”.
7 Press the PTT switch and Side 1 key.
• All channel frequencies, Common ID and QT/DQT values in
the selected zone will be restored to the default value.
• The transceiver will move to the Frequency Setting.
Note:
◆ The transceiver will automatically return to normal operation if no
action is performed for 5 seconds.