Kenwood DNX9240BT - Manual (Page 28)

28 DNX9240BT/DDX8024BT/DDX8054BT
iPod Control
Easy Control Screen
Displays the basic operation buttons on the
screen.
Display the Easy Control Screen 1
See <How to Display the Easy Control Screen>
(page 17).
Operation on the Easy Control Screen 2
2 2 2
1 1 1
3 3 3
1, 2 Switches to the Playback Screen.
3 Displays the Source Control Screen.
[ 4], [¢] Music/Video Search.
[ 38] Plays or pauses.
Playback Screen
Basic functions are available even when the
playback screen is displayed.
Display the Playback Screen 1
See <Operation on the Playback Screen of Visual
Sources> (page 16).
Operation on the Playback Screen 2
3 1
2
4
1, 3 Selects the music/video.
2 Not effective
4 Displays Source Information Screen.
⁄
The information display is cleared automatically after •
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
Remove all accessories such as headphone before
•
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
When you connect an iPod to this unit, playback starts
•
from the song you were playing on the iPod itself
(Resume Function).
If the played song is not a video content, "No Video
•
Signal" is displayed on the video screen.
You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V
(optional accessory). You can also display video contents on this unit when connecting an iPod with video.
B64-4382-00_00_E_En.indd 28 B64-4382-00_00_E_En.indd 28 09.2.19 1:03:28 PM 09.2.19 1:03:28 PM