Kenwood DNX9240BT - Manual (Page 68)

68 DNX9240BT/DDX8024BT/DDX8054BT
Screen Adjustment
You can adjust the screen mode of the monitor.
Display the Screen Adjust screen 1
Touch [ ] > [ ] > [Display] > [Screen
Adjust]. (page 59)
Set each item 2
[Bright] Brightness Control
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
Navigation Day/Night display
setting. (DNX9240BT only)
⁄
• In this Screen Adjust screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the <Screen Control> (page 43).
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected.
Display the Bluetooth Setup screen 1
Touch [ ] > [ ] > [Bluetooth SETUP].
(page 59)
Display the Connect Device List screen 2
Search for a Bluetooth unit 3
1 1 1
1 Displays the registered Bluetooth units.
The busy service becomes active. The available
service becomes inactive.
[ ] When appears, the text display is
scrolled by touching it.
[Search] Searches for a Bluetooth unit.
[SP DEV] Registers a Bluetooth unit that
cannot be registered by normal register
(pairing) operation.
⁄
A new device cannot be registered if there are •
already 5 Bluetooth units registered. Delete
unnecessary registration. See <Bluetooth Unit
Connection> (page 70).
Setup Menu
B64-4382-00_00_E_En.indd 68 B64-4382-00_00_E_En.indd 68 09.2.19 1:03:53 PM 09.2.19 1:03:53 PM