Kenwood DNX9240BT - Manual (Page 40)

40 DNX9240BT/DDX8024BT/DDX8054BT
The screen has changed to the Tuner Control
screen.
You will hear a beep again.
Control the source with voice control 4
Repeat the same procedure as step 2 or 3.
For information on the recognizable voice
commands, refer to <Voice command table>
(Separate volume)
.
End the voice control mode 5
Press the TALK switch.
⁄
• The voice control is disabled while operating the hands-
free phone.
• The voice control is disabled when is displayed on the
upper-right corner of the screen.
• The voice control is canceled when the screen is touched
or any of the buttons, except the [VOLUME] button, on
the front panel or the remote control unit is pressed.
• The voice control is disabled while using your cell-phone
with hands-free.
• The voice control is canceled if no operation is continued
for a certain period of time.
Tips for voice command
The voice recognition icons are displayed on
the operation buttons on the screen when the
voice control mode is turned on. The icons are
divided into two types: the number icon (such
as
) for the list buttons, and the icon for the
operation buttons. The command name may be
displayed.
Voice Control (DNX9240BT only)
The unit is equipped with Automatic Speech Recognition function which allows you to operate it with your
voice. The supported languages are US English, UK English, French, German, Dutch, Italian, and Spanish. For
information on the recognizable voice commands, refer to <Voice command table> (Separate volume)
.
• ASR on the Language Setting screen should be set to "Enabled" . See <Language Setting> (page 61).
Voice Control
Enter into the Voice control mode 1
Press the TALK switch.
The voice recognition icons will be attached to
the buttons supporting the voice control.
Speak the command 2
Speak the command. (Ex: Speak "Source Select".)
You will hear a beep.
The screen has changed to the Source Control
screen.
You will hear a beep again.
Speak the command 3
Speak the command. (Ex: Speak "TUNER".)
You will hear a beep.
B64-4382-00_00_E_En.indd 40 B64-4382-00_00_E_En.indd 40 09.2.19 1:03:35 PM 09.2.19 1:03:35 PM