Kenwood DNX9240BT - Manual (Page 87)

English 87
End initial setup 3
⁄
The settings above can be changed in • <Setup Menu>
(page 59).
Initial Setup
Turns the power On 1
Set each item 2
[Language] Select the language used for the
control screen and setting items. (page 61)
[Angle] You can adjust the position of the
monitor. (page 64)
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. ( "iPod")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
(
"OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": Switches to the rear camera video
display when "Reverse" gear is engaged,
and then pressing the [AUD] button for
more than 1 second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 61).
[Color] Sets the screen and button illumination
color. (page 67)
[EXT SW] Setting up power specification of
the external device for which the power is
controlled from this unit. (page 64)
When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.
Initial Setup
B64-4382-00_00_E_En.indd 87 B64-4382-00_00_E_En.indd 87 09.2.19 1:04:08 PM 09.2.19 1:04:08 PM