Kenwood DNX9240BT - Manual (Page 55)

English 55
Equalizer Control
You can set up the equalizer.
Display the Equalizer screen 1
Touch [ ] > [ ] > [Equalizer]. (page 54)
Set each item 2
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top40"/
"Jazz"/ "Game"/ "iPod"/ "User"
⁄
"User": •
Your own Graphic equalizer curve can be created.
See <Graphic Equalizer Setup> (page 55).
When "iPod" is selected, the [EQ] button is
•
deactivated. "iPod" uses its equalizer function.
[EQ] Displays the Graphic Equalizer setup
screen. (page 55)
Graphic Equalizer Setup
You can Manually set the equalizer curve.
Display the Equalizer screen 1
Touch [ ] > [ ] > [Equalizer]. (page 54)
Display the Graphic Equalizer screen 2
⁄
When "iPod" is selected in <Equalizer Control>, the •
[EQ] button is deactivated. "iPod" uses its equalizer
function.
Select the channel to be adjusted 3
[F] Front speaker
[R] Rear speaker
[C] Center speaker
Set the Graphic Equalizer 4
1 1 1
1 Gain level can be adjusted by touching the
each frequency bar.
[ 2], [3] Sets a frequency.
[ 5], [∞] Sets a gain level.
[EQ Init] Returns to the previous level which
the gain level is adjusted.
[Flat] Tone curve becomes flat.
[SW LEVEL] Adjusts the subwoofer volume.
B64-4382-00_00_E_En.indd 55 B64-4382-00_00_E_En.indd 55 09.2.19 1:03:45 PM 09.2.19 1:03:45 PM