Kenwood DNX9240BT - Manual (Page 37)

English 37
Manual Memory
(only with KTC-V300E or KTC-V301E
(optional accessory) connected)
Stores the current receiving channel in memory.
Display the Source 1 Control Screen
See <Source Control Screen> (page 36).
Select a station you wish to store in 2
memory
Store in memory 3
2 sec.
Continue to touch until the memory number
appears.
[ 2], [3], [5], [∞] Moves highlight in Digital TV
Broadcasting menu.
[Enter] Executes selected menu item.
[Return] Returns to the previous screen.
[Exit] Returns to Digital TV screen.
⁄
• When using the remote control unit to operate the TV
menu, use the one of KTC-D500E.
Auto Memory
(only with KTC-V300E or KTC-V301E
(optional accessory) connected)
Stores stations with good reception in memory
automatically.
Display the Source 1 Control Screen
See <Source Control Screen> (page 36).
Select a band you wish to store in memory 2
Select the Auto Memory mode 3
Start Auto Memory 4
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
• The operation ends automatically if you do not operate
within 10 seconds.
B64-4382-00_00_E_En.indd 37 B64-4382-00_00_E_En.indd 37 09.2.19 1:03:34 PM 09.2.19 1:03:34 PM