Kenwood DNX9240BT - Manual (Page 41)

English 41
Other Functions
External Device Power Supply Control
Controlling the external device power supply.
Display the Source Select Screen 1
See <How to Select the Source> (page 12).
Display the EXT SW Control screen 2
Control the external device power supply 3
You can turn on or off the external device power
supply.
⁄
• You must connect a commercially available relay unit in
order to use this function.
Connect the external device to be controlled to that
relay unit.
• Refer to <EXT SW Setup> (page 64) for information on
setting the power on or off specification.
Character Entry
Character Entry screen
1 1 1
1 Enters characters.
[ 2], [3] Shifts the cursor.
[ 5], [∞] Scrolls up or down the character
button display.
[QWE]/ [ABC] Sets the key layout of the
character buttons.
ABC : Alphabetical key layout.
QWE : Qwerty key layout.
[Clear] Clears the character.
If you erase a character, locate the cursor on it
and touch this button.
If touched more than 1 second, all the input
characters are erased.
[Space] Enters a space.
⁄
• You can enter characters only after you have applied the
parking brake.
B64-4382-00_00_E_En.indd 41 B64-4382-00_00_E_En.indd 41 09.2.19 1:03:36 PM 09.2.19 1:03:36 PM