Videotec ULISSE MAXI NETCAM - Manual (Page 13)

Instruc
tions manual - English - EN
11
6 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
All other parts must not be disassembled
or tampered (excepting for mounting and
maintenance operations according the
present manual).
6.1 Safety precautions before use
The appliance includes moving parts. Make
sure that the unit is positioned where it
is inaccessible under normal operating
conditions. Attach the warning label
supplied with the appliance, placing it near
the unit so that it can be seen easily.
6.2 Unpacking and contents
6.2.1 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
Unpack the sunshield from the device,
taking care not to damage the housing.
Fig. 3
6.2.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Positioning unit
• Power supply base
• Counterweights
• Accessories box:
• Serial adapter
• Serial extension cable
• Allen wrenches
• Spacers
• Label
• Ties
• Silicon sheath
• Reduction gaskets for cable glands
• Instructions manual
• Attachment plate for desiccant bag.
• Brackets for lenses and cameras mounting
• Desiccant salt bag
• Bolts and screws
6.3 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
When returning a faulty product we recommend
using the original packaging for shipping.