Videotec ULISSE MAXI NETCAM - Manual (Page 17)

Instruc
tions manual - English - EN
15
7.1.2.3 Positioning of the H-20 spacer in the
inner slide
Connect the camera and fasten the L-shaped bracket
(Fig. 9, page 14).
It is possible to fasten the H-20 spacer (02) to the
lens. Interpose a plastic spacer (01) of the required
thicknessand fix it by means of washer and screw
(03).
01
02
03
Fig. 13
Position the lens with the spacer on the inner slide
(01) and fasten the spacer by means of the washers
and screws (02) provided as standard.
01
02
Fig. 14
Finish the installation as shown in the relative images
(Fig. 11, page 14 and Fig. 12, page 14).
7.1.2.4 Desiccant salt
Insert the 2 desiccant salt sachets (01) in the position
indicated in the illustration, after having taken them
out from the transparent packaging and folding them
in half. Fasten the sachets by means of the plates (02)
and screws supplied (03).
01
02
03
Fig. 15
7.1.2.5 Positioning of the inner slide
Shift the inner slide with lens and camera already
fastened into the wanted position and secure it by
means of the washers and screws provided.
Fig. 16