2 routine printer cleaning – MagTek EC500 99875172 User Manual
Page 19
19
3-2 Routine printer cleaning
The print head warranty is directly linked to routine cleaning of your printer.
If you do not carry out this cleaning at the required times, the print head warranty will cease to be valid.
Recommended cleaning cycle:
whenever the ribbon is changed
Mandatory cleaning cycle:
when the cleaning warning is triggered
Servicing accessory:
cleaning card
Your printer is fitted with a cleaning warning system which is triggered after a certain number of cards have been inserted,
depending on the model of printer that you have (see table below).You should proceed with the routine cleaning of your printer
as soon as the warning is triggered. If you continue to run the printer despite the warning and if the warning light starts to
flash,the print head warranty will be automatically voided owing to a failure to comply with your contractual maintenance
obligations.
Cleaning required after (warning light steady):
1000 cards
Number of cards remaining before warranty voided(warning light steady):
200 cards
Warranty invalid after (warning light flashing):
1200 cards
- USB MagnePrint Swipe Reader with Encryption
- USB HID Swipe Reader
- USB MagneSafe Swipe and Insert Reader V5
- Bluetooth MagneSafe V5 Swipe Reader
- MagneSafe V5
- DynaPro99875265
- IPAD99875382
- IPAD99875395
- DynaPro Mini Programmer's99875629
- Excella, MICR Check Reader99875310
- Excella Windows API99875313
- IMAGESAFE99875500
- Excella API OCX99875557
- Excella USB RNDIS99875491
- Excella99800048
- MICRSafe99875466
- Excella STX99875340
- Excella STX99875342
- Excella STX99875344
- MICRSafe99875516
- EC500 99875171
- EC2000 99875646
- EC2000 99875600
- EC2000 99875607
- EC2000 99875651
- EC2000 99875692
- EC2000 99875713
- EC2000 99875631
- EC500 99875170
- EC1000 99875417
- MODEL MT-85
- InSpec 9000
- InSpec 9000-2005
- INTELLISTRIPE 380 USB/RS-232
- MCP
- MAGTEK
- IntelliCAT99875658
- IntelliCAT99875659
- IntelliCAT99875662
- IntelliCAT99875663
- IntelliCAT99875664
- IntelliCAT99875667
- IntelliCAT99875669
- 99875125
- OMTD 99875144
- IntelliStripe65 99875141
- IntelliStripe65 99875161
- IntelliStripe65 99875339
- IntelliStripe 60 99875135
- IntelliStripe 70
- IntelliStripe 320 99875167
- IntelliStripe 320 99875168
- IntelliStripe 350
- SWIPE & PARK
- SWIPE & PARK MT
- HALF CARD PORT
- MT-215232 RS-232
- PORT POWERED
- P-SERIES
- TRIPLE TRACK Delta ASIC
- MT-215 TTL HALF CARD
- MT-215 TTL SINGLE OR DUAL HEAD
- MT-215 TTL SINGLE HEAD, 3-TRACK
- P-SERIES TTL
- 3V & 5V
- USB INSERTION READER
- P-SERIES USB
- IntelliStripe 310™
- IntelliStripe 310™
- IntelliStripe 340
- MT-211232 RS-232 1 OR 2 TRACK
- MT-211232 RS-232 3-TRACK
- FULL SIZE PORT
- PORT POWERED SWIPE READER
- SWIPE READERS
- USB HID INTELLIHEAD
- USB KB INTELLIHEAD
- SWIPE READERS WITH 3-TRACK
- 100-MILLIMETER COMPATIBLE
- 100-MILLIMETER SWIPE READER WITH SHIFT-OUT ASIC
- 101-MILLIMETER COMPATIBLE
- 43-MILLIMETER COMPATIBLE
- 90-MILLIMETER COMPATIBLE SWIPE READER
- 90-MILLIMETER SWIPE READER
- USB HID SURESWIPE & USB HID SWIPE READER
- USB KB SURESWIPE & USB KB SWIPE READER
- USB (UNIVERSAL SERIAL BUS) FULL SIZE SWIPE READER
- USB (UNIVERSAL SERIAL BUS) KEYBOARD EMULATION
- MAG-WEDGE READER
- MINIWEDGE SWIPE READER
- EXCELLA STX
- MINI MICR RS232
- MINI MICR WEDGE
- MINI MICR USB
- MICR Plus RS-232
- MICRImage CHECK READER
- MICRImage
- MICRIMAGE RS232 - PC
- SWIPE READERS WITH RS-232
- LOW POWER SHIFT-OUT
- TRIPLE-TRACK ASIC
- SLIM PROFILE CARD
- Audio Jack
- MAXI MICR RS232
- QwickCodes
- JMTMacMS Applet
- MTMICRImage
- MTKBDWEDGE.OCX
- MTPPSWIPE.OCX
- SENDKEYS.OCX
- iDynamo
- iDynamo MagneSafe V5
- BulleT MagneSafe
- MTBLUETOOTH.OCX
- BLUETOOTH SWIPE READER
- USB MagneSafe V5 Flash
- Secure Card Reader
- JMSR Applet for MagTek
- BulleT
- SCRA Reader
- USB READER FOR ANDROID
- OPOS FOR MSR
- Audio Reader
- Audio Reader for Android Devices
- uDynamo
- TTL
- INTELLISTRIPE 50
- MICRbase
- QwickPAY
- QwickPAY iOS