MagTek EC500 99875172 - Manual (Page 5)

5
1. Getting started
1-1 Unpacking
Your printer is supplied with several accessories that we ask you to look at closely.
This list may vary depending on your location.
The printer is shipped in special packaging designed to prevent any damage in transit. If you notice any visible damage, do not hesitate
to contact the shipper and immediately inform your MagTek dealer, who will tell you the procedure to follow.
MagTek takes great care over the quality of its packaging and we ask that you keep this packaging somewhere clean and dry.
You will be asked for the full original packaging (outer box, inner wedges and protective bags) in the event that the printer is
returned. If the printer is returned without its original packaging and components are damaged in transit, these components
will no longer be covered by the warranty. You will be charged for new packaging for shipping the printer back to you.
Accessories supplied with your printer:
• Power supply unit - VP ELECTRONIQUE or SWITCHBOX Type F10723-A or Type EA10723
• Mains power cable
• USB cable
• Drivers CD-ROM
• Starter cleaning kit
• Quick installation guide
If any of these components is missing, please contact your MagTek dealer.
Use only the power supply unit supplied with your ExpressCard 500.
VP ELECTRONIQUE or SWITCHBOX Type F10723-A or Type EA10723.
Use only the USB cable supplied with your ExpressCard 500.
The ExpressCard 500 must be placed in a dry location, protected from dust and draughts but well-ventilated. Take care to keep
your printer on a flat, sturdy surface able to bear its weight.