MagTek IntelliStripe 320 99875167 User Manual
Page 20
Advertising
IntelliStripe 320 Motorized Reader
12
Figure 5 shows the position for mounting the IntelliStripe 320 with the “D” Bezel attached. The
mounting holes are shown in the bottom view. The “A” Bezel is attached to the unit by the “A”
Bezel retaining screws also shown in the bottom view. Because the “D” Bezel is symmetrical,
the unit may be mounted from the top or bottom, depending on the desired card orientation.
(Note that no LED is used with the “D” Bezel configuration.)
Figure 5. “D” Bezel Mounting – Top, Side, and Bottom Views
Advertising