Rs-232 cable, Usb cable – MagTek IntelliStripe 320 99875167 User Manual
Page 29
Section 2. Installation
21
RS-232 Cable
Figure 16 shows the cable that connects the IntelliStripe 320 (7-pin connector) to the host (9-pin
connector), P/N 16051408. The standard length of the cable is 6’.
Figure 16. RS-232 Cable
Table 2-1 lists the Connector Pin Numbers and Signal Names.
Table 2-1. Pin List for RS-232 IntelliStripe 320 Connectors
Molex 7 Pin (51065-0700)
DE-9 Female
2.5mm Power Jack
Pin Number
Signal Name
Pin Number Signal Name
1
TXD
2
RXD
2
+12V
CENTER PIN
+12V
3
PWR GND
SHELL
GND
4
RXD
3
TXD
5
RTS
8
CTS
6
CTS
7
RTS
7
SIGNAL GND
5
GND
6
DSR
4
DTR
USB Cable
MagTek provides a USB cable (P/N 16051430) that connects the Host (USB A plug) to the
IntelliStripe 320 (USB B plug). The overall length of the cable is 6’. Any standard USB A-to-B
cable can be used.